Details of X - 6 Chassis Lay-Out
zoom
zoom
Top view shows unique transmission giving mid-motor layout. Also 4 + 2 battery configuration for best weight distribution front-to-back and side-to-side. Car's mass is centered ahead of the rear axle for best cornering, jumping, and stability over bumps. Also shown: unique wing mounts to stop wing flew generating more downforce from the same wing area.
Close-up of transmission and motor plate. Note vertical bolts holding transmission in car. Shims can easily be added/subtracted to change height of outdrives for different track conditions. This affects forward/side bite. Front of motor plate bolted to chassis for extra rigidity. Car has virtually zero flex.

zoom
Rear suspension mounting system. Two different toe-in bars supplied with each Kit, giving 3 degrees toe-in or four per side. Note slots under the two washers -- Vertical screws from under the chassis go into the toe-in bar. Add/subtract shims quickly to set anti-squat.

zoom
 
Bottom view of "graphite" chassis showing lowered batteries and molded "graphite" rear control arms. Four steel threaded inserts are used to hold the transmission in the car adding strength.
 
Click here to go home.